Important Safety Instructions for Pools

General Information Important Safety Instructions 1. READ AND FOLLOW ALL INSTRUCTIONS.  2. For cord connected/convertible units: DANGER – Risk of injury.  A. Replace damaged cord immediately. B. Do not bury cord. C. Connect to a grounding type receptacle only.  3. For all permanently connected units intended for use on 15 or 20 ampere, 125V or...

Status Lights on Your CCW100 or CCW50

Light Functionality Green LED Light: System is on and operating properly.  Yellow LED Light: Cartridge Unit has reached 80 percent of its life expectancy (8,000 hours) and it’s time to purchase a replacement cartridge. To exchange your Cartridge, please visit: clearcomfort.com/cartridge Red LED Light: Cartridge Unit has reached its life expectancy and needs to be...

Key Features & Operating Ranges for Pools

Video: Clear Comfort Residential AOP Pool System Overview Key Features This process can be performed in 1 hour or less on most pools. After the Clear Comfort system is installed, it is ready to start treating the water immediately. The Clear Comfort system protects pool or spa water (biocide, scale control and corrosion control) without...

Install Specs, Materials & Tools for Pools

System Installation: Pools & Inground Spas For the CCW100 AOP Pool System or CCW50 AOP Inground Spa & Small Pool System Prior to installation, a site survey should be performed to validate that the correct system parameters are in place and ready for installation. We recommend that you maintain compliance within the following operating ranges...

Electrical Installation

Electrical Installation – General Follow all local and national electric codes. Determine Your System’s Version:  Version 2.2: No Ballast Switch (Made After 2022) If your system does not have a ballast switch, it will automatically adjust for either 120V or 230V. Skip to Step 4 on page 13. Version 2.1: With Ballast Switch (Made Before...

How to Install Your Manifold Kit

Video: Manifold Install Kit – Gate Valve   Have a 3-Way Valve Manifold Install Kit? See the tutorial here. Full Diagram: Manifold Install Kit  NOTE: The Manifold injection is the preferred Clear Comfort pool and inground spa system installation method.  Instructions: Manifold Install Kit  PLEASE NOTE: Turn main pool pump OFF and switch off main...

Connecting Cartridge & Manifold

Connecting Your Control and Cartridge Units Gently align the notched outdent on the front of the Cable Connector with the keyed indent on the front of the Cartridge Connector, as shown with the arrow in Figure below. Seat the Cable Connector down onto the Cartridge Connector and turn the Cable Connector’s Collar a quarter-turn clockwise...

How to Exchange Your Cartridge

Video: CCW100 & CCW50 Cartridge Exchange How to Exchange Your Cartridge: CCW100 & CCW50 To keep the Clear Comfort system working its best, the Cartridge Unit must be exchanged annually. No other system maintenance is required.  If the Yellow LED Light is ON, your Cartridge will expire soon and it’s time to order a new...

FAQs for Cartridge Exchanges & Core Deposits

How to Replace Your Air Check Valve

Video: Air Check Valve Replacement How to Replace Your Air Check Valve Step 1: Uninstall Coupling Remove blue Air Tubing from the Barbed Fitting on the Manifold’s Venturi Remove gray Coupling from Manifold’s Venturi Unthread the Barbed Fitting from Coupling. Important Note: Set Barbed Fitting Aside for Step 4. Step 2: Prep Venturi On the Manifold’s...

How to Install Your Valved Flow Meter

Video: Valved Flow Meter Installation How to Install Your Valved Air Flow Meter Install Steel Elbow Fitting Screw the Stainless Steel Elbow Fitting into the bottom hole on the Cartridge Unit. Make sure the Elbow Fitting’s outlet points forward. Temporarily Uninstall Bottom Fitting To make room for the installation, temporarily unscrew and remove the Flowmeter’s...

FAQs for Pools

FREQUENTLY ASKED QUESTIONS FAQ for Residential Pools